Why Is My Windows 10 Not Loading — Expert answer

1. Restart the PC, and as soon as Windows 10 tries to load; remove the power supply or press and hold the Power button to force shutdown. In Boot options, go to “Troubleshoot -> Advanced options -> Startup Settings -> Restart.” Once the PC restarts, you can choose Safe Mode from the list using the numeric key 4.

How do I fix Windows 10 stuck on loading screen?

How to Fix Windows 10 Stuck on Loading Screen? Unplug USB Dongle. Do Disk Surface Test. Enter Safe Mode to Fix This Issue. Do System Repair. Do System Restore. Clear CMOS Memory. Replace CMOS Battery. Check Computer RAM.

Why is Windows 10 stuck on loading screen?

In some cases, the “Windows stuck on loading screen” issue is caused by Windows updates or other problems. At this time, you can enter the Safe Mode, do nothing, and then reboot your computer to help the computer start normally again. Safe Mode starts with a minimum set of drivers, software, and service.

What to do if Windows 10 is not starting?

Windows 10 Won’t Boot? 12 Fixes to Get Your PC Running Again Try Windows Safe Mode. Check Your Battery. Unplug All Your USB Devices. Turn Off Fast Boot. Check Your Other BIOS/UEFI Settings. Try a Malware Scan. Boot to Command Prompt Interface. Use System Restore or Startup Repair.

What do you do when Windows won’t load?

Restart the computer. Press the F8 key as soon as the computer starts to boot, but before the Windows logo appears on your screen. Select Disable automatic restart on system failure.

Why is my computer not booting into Windows?

Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from the correct hard drive. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector.

Why does my computer just keep spinning?

A spinning cursor means the system is busy. Sometimes, a program or driver may be causing a spinning blue circle; in that case you will have to check for any recent program or driver changes made to the system and reverse them.

Why is Valorant stuck on loading screen?

The most common reason for Valorant to be stuck on a loading screen is due to a messed up install of the game’s Vanguard anti-cheat system. You can solve this by reinstalling the entire game, but it’s faster to just reinstall Vanguard itself.

What do I do if my laptop is stuck on the loading screen?

Try the following Power off the laptop. Power on the laptop. As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off. Repeat this process a few times until you see the “Preparing Automatic Repair” screen.

How do I boot into Safe Mode with Windows 10?

How to boot in Safe Mode in Windows 10 Hold down the Shift button as you click “Restart.” Choose “Troubleshoot” on the Choose an option screen. Choose “Startup Settings” and then click Restart to get to the final selection menu for Safe Mode. Enable Safe Mode with or without internet access.

How do I fix my computer if it wont start up?

How to troubleshoot your Windows PC when it won’t turn on Try a different power source. Try a different power cable. Let the battery charge. Decrypt the beep codes. Check your display. Check your BIOS or UEFI settings. Try Safe Mode. Disconnect everything non-essential.

How do you restart a Windows 10 computer?

Hard Reboot Press and hold the power button on the front of the computer for approximately 5 seconds. The computer will shut off. No lights should be near the power button. If lights are still on, you can unplug the power cord to the computer tower. Wait 30 seconds. Push the power button to turn the computer on again.

Why won’t my computer turn on but has power?

If your PC won’t turn on but motherboard light is on, a potential culprit is the power button on the case itself or the wires connecting that button to the motherboard. Using this power button will turn on the system just as a properly wired power button would. If this works, you’ll know the issue is your case.

Why does my PC turn on but no display?

If your computer starts but displays nothing, you should check is if your monitor is working properly. Check the power light of your monitor to verify that it’s turned on. If your monitor won’t turn on, unplug the power adapter of your monitor, and then plug it back into the power outlet.

When I press the power button on my computer nothing happens?

If you’re still getting absolutely nothing when you press the power button, look to see if your motherboard has any idle indicator lights to confirm that the motherboard is definitely receiving power. If not, then you might need a new power supply. Make sure it runs to the motherboard and is well connected.

How do I fix BIOS not booting?

If you cannot enter the BIOS setup during boot, follow these steps to clear the CMOS: Turn off all peripheral devices connected to the computer. Disconnect the power cord from the AC power source. Remove the computer cover. Find the battery on the board. Wait one hour, then reconnect the battery.

How do I force my computer to start?

Use the power button Locate your computer’s Power button. Press and hold that button until your computer shuts down. Wait until you hear the computer’s fans shut off, and your screen goes completely black. Wait a few seconds before pressing and holding the power button to initiate your computer’s normal startup.

How do I boot into Windows recovery?

How to Access Windows RE Select Start, Power, and then press and hold Shift key while clicking Restart. Select Start, Settings, Update and Security, Recovery. At the command prompt, run the Shutdown /r /o command. Use the following steps to boot the System by using a Recovery Media.